VX800 Forum

Marketplace => Buy, Sell or Trade => Topic started by: Vishnuisgod on May 19, 2016, 10:18:53 PM

Title: Everything but the frame....almost free
Post by: Vishnuisgod on May 19, 2016, 10:18:53 PM
Im cleaning out my closet(s) (3).....

Ill attach more pics as i go through each bin...
Im trying to get rid of stuff; hopefully by months end
internals willl ikely go straight to the recycler as no one really needs a transmission or two, or 3 sets of rear pegs.... you get the idea.
Some stuff will be priced stupidly cheap, but most is free....
stay tuned...
Title: Re: Everything but the frame.... free
Post by: Tinbasher on May 20, 2016, 07:39:48 AM
Hi if you have a spare dashboard panel that holds the speedo and tacko please let me know how much you want for it.
Thank You
Richard
Title: Re: Everything but the frame.... parts for all
Post by: Vishnuisgod on May 20, 2016, 09:37:25 PM
well what do we have here,
4 clutch levers
4 brake levers,
petcock gasket kit
a  very rare lift handle (for sale)
a NOS tank bra (for sale)
coils (I have 6 more)
5 drive splines (one is a very rare "black")(highly sought after by the guys at GS resources...
fuel pump
1 custom 2# 3/4" steel fork brace,
tail light lens (1 of 2)
a fuse box with a proper cover (unbroken tabs)
Buell Ulysses hand guards (with proper hardware - Thanks TWORide for the parts numbers)
I also have (not pictured) a set of oxford heated grips without a controller (the wires on the controller got ripped out)
3 sets of carbs
Outlaw Racing bar riser kit
Title: Re: Everything but the frame.... free
Post by: Vishnuisgod on May 20, 2016, 09:47:30 PM
more pics
headlight and bucket with lens
engine internals
a set of very rare engine guards brought to the Colonies by a very friendly UK Vxer
Title: Re: Everything but the frame....almost free
Post by: Dave-1994-VX800 on May 30, 2016, 04:03:56 PM
Hey, that's an interesting clearout :)! do you still have the engine guards?? Also do you happen to have a yoke and or ignition?? What year of vx800 are the parts for?

Many thanks

Dave
Title: Re: Everything but the frame....almost free
Post by: Vishnuisgod on May 31, 2016, 12:52:21 AM
Hey, that's an interesting clearout :)! do you still have the engine guards?? Also do you happen to have a yoke and or ignition?? What year of vx800 are the parts for?

Many thanks

Dave

yup still got the guards, but not sure if Im ready t let them go....

yup I have a NOS triple clamp set. (with bearings). As far as I know all, I mean all the VX800 triple clamps were the same. If they dont fit, it wasnt from a VX800. Some ppl dont know and call a VZ800 a VX Marauder, then shill the parts as VX stuff. 

Send me a pm on Thursday, Im off, and I can swing by my storage and pull the parts if you wantem. Where in the world are you? Send me a zip code.

cheers
alan
Title: Re: Everything but the frame....almost free
Post by: Dave-1994-VX800 on May 31, 2016, 01:31:55 PM
Hey, I'm in Scotland, I'm working thursday but can pop on after work. I'll attach a couple of pictures of what I need with this as cant do it using PM. That's interesting about the sizing, may be worth having a word with the guy again. I assumed when it was different that perhaps they changed the specs when moving from american to european market. I did notice the yokes looked similar models and wondered if any of those may work.
Title: Re: Everything but the frame....almost free
Post by: Dave-1994-VX800 on May 31, 2016, 01:33:36 PM
yoke different view
Title: Re: Everything but the frame....almost free
Post by: Vishnuisgod on May 31, 2016, 09:39:06 PM
Dave,

those look like vx yokes/clamps. Can you attach a pic of the other ones.

is all you need an ignition?

Cheers
Alan
Title: Re: Everything but the frame....almost free
Post by: Dave-1994-VX800 on June 05, 2016, 04:42:15 PM
Hi, I could ideally do with a yoke and ignition together, my yoke got cracked as well and the tamper proof bolts are getting in my way anyway. Here's a pic of the one i got online.
Title: Re: Everything but the frame....almost free
Post by: Dave-1994-VX800 on June 05, 2016, 04:43:41 PM
pic 2
Title: Re: Everything but the frame....almost free
Post by: Dave-1994-VX800 on June 05, 2016, 04:44:23 PM
pic 3
Title: Re: Everything but the frame....almost free
Post by: Vishnuisgod on June 08, 2016, 01:48:12 AM
pic 3
Dave,

Those do look like yokes from a VX800, if they dont fit, how are they different? I cant tell from the pictures... they look the same...

Alan
Title: Re: Everything but the frame....almost free
Post by: Motovsky on August 30, 2016, 09:48:42 AM
Hi, I just wonder if you would be able to ship me some parts to Orlando till Friday. I am from Czech and I would be interested in the whole wiring of electricity, cdi, 2 coils, signal lights, front light, both muflers without the parts connected to cylinders, so only muflers, fuel cock especially the Turner, the cover of fuel cock.  I am here only till Friday than I fly back. I have just started restoration of my vx and in Europe it is not easy to find these parts or they are expensive. So if that would be possible and how much would you like to get for these parts, let me pls know. Thx
Title: Re: Everything but the frame....almost free
Post by: davemike on August 30, 2016, 02:17:50 PM
Hi there have you got a pair of those handlebar risers spare, i am quite happy to pay you the going rate. Dave.
Title: Re: Everything but the frame....almost free
Post by: Geofroy on December 22, 2016, 02:53:17 PM
Hi
I could use a set of Carburetors. I really just need the rear but I'll take a set if you still have them.
please let me know your price.
thanks
Title: Re: Everything but the frame....almost free
Post by: Vishnuisgod on December 30, 2016, 09:08:48 PM
Hey, sorry for the late reply, IM Japan for a few more months.  I am pretty sure I have a set, I can check whenI get home.

Cheers
Alan
Title: Re: Everything but the frame....almost free
Post by: Evilmoon11 on February 08, 2017, 08:38:31 AM
I am interested in the petcock gasket kit if it's still available.
Title: Re: Everything but the frame....almost free
Post by: VXinSC on April 27, 2017, 09:52:55 PM
How much do you want for the tank bra?

Scott in South Carolina
Title: Re: Everything but the frame....almost free
Post by: Vishnuisgod on April 27, 2017, 11:26:48 PM
How much do you want for the tank bra?

Scott in South Carolina
$1,000,000....

or make me an offer....
Title: Re: Everything but the frame....almost free
Post by: Aarlings on July 17, 2018, 01:14:33 AM
hi.
im interested in the left side panel if your bike is purple
and allso the tail lighet
i have an 94 mod and live in norway
Title: Re: Everything but the frame....almost free
Post by: Vishnuisgod on July 19, 2018, 10:21:06 AM
hello,

I do have set, however they are not purple, sorry
Title: Re: Everything but the frame....almost free
Post by: rudy1960 on September 30, 2018, 07:37:37 PM
Hi, do you still have any vx parts for sale. Regards Ron.
Title: Re: Everything but the frame....almost free
Post by: Vishnuisgod on September 30, 2018, 08:52:00 PM
Hi, do you still have any vx parts for sale. Regards Ron.

some, not many, what are  you looking for?
Title: Re: Everything but the frame....almost free
Post by: rudy1960 on October 20, 2018, 12:50:01 PM
sorry for late reply do you have the round cover to turn the petrol tap on and off. Thanks I m in UK.
Title: Re: Everything but the frame....almost free
Post by: Vishnuisgod on October 24, 2018, 03:53:57 PM
sorry for late reply do you have the round cover to turn the petrol tap on and off. Thanks I m in UK.

sorry, I dont have that
Title: Re: Everything but the frame....almost free
Post by: Gs1327 on October 24, 2018, 08:00:26 PM
Would you by chance have a decent right muffler? I'm in Ohio zip 44060
Title: Re: Everything but the frame....almost free
Post by: Vishnuisgod on October 25, 2018, 01:44:57 AM
Would you by chance have a decent right muffler? I'm in Ohio zip 44060
Whats a decent muffler. I have one with a bit of a scrape on it. Do you know that the muffler and pipes are a welded piece??? Post a pic of what you have and Ill tell you if mine is better or worse...
Title: Re: Everything but the frame....almost free
Post by: Tilos on October 25, 2018, 12:25:06 PM
I'm looking for a shift lever, just the lever no linkage.
Is this something you have?
Ken
Title: Re: Everything but the frame....almost free
Post by: Gs1327 on October 27, 2018, 09:34:32 PM
Would you by chance have a decent right muffler? I'm in Ohio zip 44060
Whats a decent muffler. I have one with a bit of a scrape on it. Do you know that the muffler and pipes are a welded piece??? Post a pic of what you have and Ill tell you if mine is better or worse...

Here's a picture of what I have.